Description:

• Cross Brush Unit:
• The cross brush consists of two bi-directional brush belt units with 80 changeable inserts each. The unit has a high adjustment for the compensation of the consumption of different kinds of inserts
• Tracking Belt 100 mm x 3100 mm
• Sanding belt rotational speeds: 0-20 m/sec
• Drive power by inverter: 2.2 Kw Longitudinal Brush Unit:
• Features compensations for brush wear and device to raise brush units in event feed conveyor stops
• While parts are being sanded. Sanding hub will accept most brands of sanding strips.
• Brush diameter 400 mm
• Sanding belt rotational speeds:   0-1400 m/min
• Drive power by inverter: 2.2 Kw
• Electrics: 600/3/60 
• Graphic operating terminal
• 320 x 240 pixel
• Lexan skin
• SIEMENS microprocessor
• Memory for 200 sanding programs
• Pre-prepared for all line functions.
• 1 vacuum table, 9.0 Kw, with automatic shut-off.
• 1 x rotating blowers, time controlled
• Glass viewing doors