TMW Machine: #366
Manufacturer: Brandt
Model: KDF-780-2C
YMFG: 2006
Voltage: 208V 60Hz 3Ph
Condition: Very Good Condition
Price: CDN $ 79,000
Location: Central Canada
Description:
-
This machine is still set up and available for demonstration
-
PC-20 program controller with 256mb of ram, 1gb flash card, 12" screen, USB port and remote diagnostic link
-
.4 to 15mm edge thickness
-
2 3/8" maximum panel thickness
-
6 3/8" minimum panel length
-
2 3/8" minimum panel width
-
Machine has line control with no limit switches for workstation timing
-
Pressure beam height adjustment with digital height indicator
-
Light signal to schedule in-feed spacing of panels
-
2 X 3hp 12,000RPM pre-mill with program controlled indexing from straight to bevel
-
Quick (10min) heat up glue system with quick change pot for glue color changing and maintenance
-
LED glue temperature indicators for glue pot and application roller
-
Automatic glue temperature reduction if inactive for 15 minutes
-
Reversible and retractable glue application roller
-
800mm diameter support table for 3mm edging and automatic strip feeding
-
Heavy duty guillotine for 3mm PVC
-
1 driven and 3 idle pneumatically controlled pressure rollers
-
2 X 1/2hp 12,000rpm end trim saws that adjust under program control from 0 degrees to 15 degrees
-
Top and bottom 3/4hp 12,000rpm rough trim heads with insert knives for 3mm pvc
-
Top and bottom 3/4hp 12,000rpm fine trim heads with servo motor controlled positioning. Horizontal and vertical tracing wheels. Heads bevel from 0 degrees to 15 degrees with insert knives for 3mm pvc
-
2 X 1/2hp 12,000rpm corner rounding heads for front and trailing corners
-
Top and bottom 3mm radius scrapers with pneumatically controlled indexing
-
Top and bottom excess glue scrapers
-
Top and bottom 1/4hp 2,800rpm oscillating buffers
-
3hp variable feed motor from 36 to 65fpm
-
Corner rounding is done at 52fpm
-
12,000rpm heads have high frequency motors with electronic brakes
-
Operation control panel with PLC, key pad and LED readouts