TMW Machine: #493
Manufacturer: Homag
Model: KL 79
YMFG: 2002
Voltage: 600V 60Hz 3Ph
Condition: Good Condition
Price: CDN $ 34,500
Location: Central Canada
Description:
-
Single sided edgebanding machine
-
Panel support with rollers extractable to 1500mm
-
Additional panel support
-
Chip channel in machine frame
-
Glue roller stop and glue container back-off in case of feed stop
-
80mm wide rubber covered chain with hardened guiding surfaces
-
Magnetic braking on feed
-
Motorized "V" belt top pressure
-
Motorized beam height adjustment with digital readout
-
Control voltage is 24 volt
-
Electricals to CE and CSA norms
-
Line control for remote control of the processing units
-
PLC with LED display of all inputs and outputs
-
NC-21 control
-
OS9 operating system with Windows
-
On-screen and remote diagnostics
-
On-screen display of all required manual set-up adjustments
-
Feed variable 10 to 20m/m
-
Working height 950mm
-
Min working width for panels to 75mm thick is 22mm for panels up to 120mm is 60mm
-
Panel overhang to 40mm
-
Panel thickness 12 to 60mm
-
Edge material .4 to 15mm
-
Edge material on coils to 3mm
-
Maximum coil diameter 830mm
-
Electromatic edge blow off device
-
Pre-heating of work piece and edge prior to gluing
-
6 roll tape magazine
-
1 driven 200mm and 6 idle 150mm pressure rollers with single adjustment for edge thicknesses
-
2 motor end trim .4KW 12,000RPM with 120mm diameter saws with frequency inverter with motor braking
-
1.5KW 12,000RPM top and bottom rough trimming unit with plug in connections and height adjustment with top pressure and motor braking function
-
2 motor fine trimming .4KW 12,000RPM with plug type connections and height adjustment with top pressure and swiveling adjustment from 0 to 30 degrees including motor braking function
-
2 motor fine trimming as above
-
Pre-wired for universal trimming unit
-
Pre-wired for profile trimming unit
-
Sound and dust enclosures
-
1 .55KW bottom and 1 .55KW top Chamfer/Radius sanding unit for workpieces 12mm thick for sanding belt 2,000mm X 20 to 35mm. Belt speed 7m/sec
-
Pre-wired for straight sanding unit