TMW Machine: #415
Manufacturer: Bargstedt
Model: Profiline TDP210 DG 25 12
YMFG: 2005
Voltage: 480V 60Hz 3Ph
Condition: Very Good Condition
Price: Call for Price
Location: Northeast
Description:
Bargstedt-Heeseman Complete Panel Sanding Production Line for the sanding of 4' x 8' panels.
Equipped as follows: Bargstedt Profiline TDP210/DG/25/12 Infeed Vacuum Lift with panel flipper and conveyor
Line Layout as follows:
- (1) Bargstedt TFR580/G/50/41/12 Infeed System
Consisting of:
(2) Drive Infeed Roller Conveyors
(1) Vacuum Lifter with (3) positions
Complete with Safety Fencing
- (1) Bargstedt THR800/L/40/33/12 Driven Alignment Conveyor
- (2) Bargstedt TTG500/2/25/12 Driven Belt Conveyor
- (1) Bargstedt TFB100/31/12 Driven Automatic Panel Flipper
- (1) Control Cabinet with PLC controls for complete line control
- Total Connected Load: 16kW; Nominal Current: 35A
- Compressed Air Requirements: 88 NL/Min; 3.5 SL/Min
Machine Workpiece Sizes Specifications:
- Length Min/Max: 1500mm/2440mm
- Width Min/Max: 900mm/1220mm
- Thickness Min/Max: 5mm/40mm
Heeseman MFA 6 Impression Wide Belt Sander Q/L/L
- 1st Head - Cross Belt, 2 - Speed, CSD segmented Head
- 2nd Head - Longitudinal Wide Belt, 2 - Speed, CSD segmented Head
- 3rd Head - Longitudinal Wide Belt, Infinitely Variable 0-100% Speed, CSD segmented Head
- 4th Head - Brush.
- Table speed infinitely variable speed with suction.
- Sander was tied into a production line and will need to be modified to run independent of line control. Requires a minor software change that can be done during installation. Sander was also modified to run only 51" belts, can be modified to run stock widths.
Heeseman MFA 6 Impression Wide Belt Sander Q/L/L
- 1st Head - Cross Belt, 2 - Speed, CSD segmented Head
- 2nd Head - Longitudinal Wide Belt, 2 - Speed, CSD segmented Head
- 3rd Head - Longitudinal Wide Belt, Infinitely Variable 0-100% Speed, CSD segmented Head
- 4th Head - Brush.
- Table speed infinitely variable speed with suction.
- Sander was tied into a production line and will need to be modified to run independent of line control. Requires a minor software change that can be done during installation. Sander was also modified to run only 51" belts, can be modified to run stock widths.
- 1st head does require minor work. Drive pulley for sanding belt shows sign of vibration. Motor is good and bearings were replaced on drive pulley. Requires a new shaft.
Bargstedt Profiline TSP210/DG/25/12 Outfeed Vacuum stacker
Line Layout as follows:
- (1) Bargstedt TFR580/G/50/61/12 Outfeed System
Consisting of:
(3) Driven Outfeed Roller Conveyors
(1) Vacuum Lifter with (4) positions
Complete with Safety Fencing
- (1) Bargstedt THR800/L/40/33/12 Driven Alignment Conveyor with panel centering
- (1) Control Cabinet with PLC controls for complete line control
- Total Connected Load: 12kW; Nominal Current: 26A
- Compressed Air Requirements: 60 NL/Min; 2.4 SL/Min
Machine Workpiece Sizes Specifications:
- Length Min/Max: 1500mm/2440mm
- Width Min/Max: 900mm/1220mm
- Thickness Min/Max: 5mm/40mm
The Machine Warehouse performed all the service work on this machine including installation. Contact us to see how we can help you with this sander. This machine is being sold as a complete sanding line with an (2) sanders and automatic feeder, panel flipper, and stacker.
Machine is also being sold seperate under the followin TMW Machine Listings:
You can also view a video of this machine in operation taken January 2011 at:
TMW Machine: 415 Bargstedt-Heeseman Automatic Panel Sanding Line Video